| Wavelength | 1064nm |
| Fiber Core Diameter | 50um, 100um |
| Output Interface | QBH |
| Fiber Length | 10m, 20m |
Authentic Reliable
Our cables are engineered for high accuracy, ensuring each one is reliable and low loss.
Durable
Made from industrial-grade material that withstands the test of time.
Easy Installation
Offered with quick installation guide, getting your machine up and running in no time.
Versatile Compatibility
Suitable for various brands and models of laser cutting and welding sources.
Authentic, Affordable, and Expert-Supported
Brogo Laser offers transmission and operation optical fibers in various lengths and core diameters. Custom connectors, custom process lengths and diameters available.
Reliable low-loss optical fiber capable of delivering kilowatt-level laser beams over long distances.
Pro Repair Guide
-
Optical Fiber Access
- First place the laser head and the optical fiber interface in a horizontal state;
- Do not remove the protective cover or protective tape of the laser head first;
- Remove the fiber optic cable dust cap and check whether there is dust on the QBH and the optical fiber connector. If there is, clean it with a dust-free cleaning stick and IPA;
- Remove the protective cover;
- Gently insert the optical fiber into the QBH;
- After inserting to the bottom, rotate the two red marks on the rotating sleeve as shown in the figure below to align with the white mark frame, or turn it until it cannot be rotated;
- Then pull up the rotating sleeve in the direction shown in the figure;
- After pulling it up, gently rotate it again with moderate force, usually it feels tight. It can be aligned or exceeded in the middle, but be careful not to twist it again.
Pulling Out the Optical Fiber
Reverse the above steps. Note:- The laser head and the optical fiber head must be cleaned before disassembly.
- The laser head must be pulled out horizontally when plugging and unplugging the optical fiber.
- After the fiber optic cable is pulled out, the optical fiber output head must be protected with a dust cap immediately
Packaging Details
At Brogo Laser, we understand the importance of securing your industrial laser equipment accessories. Each product is meticulously packaged in custom-designed boxes to ensure it reaches you in perfect condition.
Reviews
There are no reviews yet.